TS-4030 mini Laser engraving inji ne musamman amfani da wani iri-iri na wadanda ba karfe crafts, kyautai, bamboo da itace kayayyakin engraving, na iya zama a cikin wani iri-iri na kayan, iri-iri na siffofi abu surface engraving kyawawan hotuna, hotuna, yin iri-iri. na kyaututtukan sana'a, amma kuma zana alamomi iri-iri, alamu.
The inji inji tsarin ne mafi m da m, barga yi, azumi sassaka gudun, high daidaici, dace da sana'a da kuma kyauta ofishin wuri don sanya aikin, ne mai matukar tsada-tasiri high-madaidaici Laser engraving inji, rare tare da kanana da matsakaici. - manyan kamfanoni.
| Samfura | TS4030 Laser engraving da sabon na'ura |
| Launi | Blue da Fari |
| Girman Teburin Aiki | 400mm * 300mm |
| Laser Tube | Rufe CO2 gilashin Tube |
| Teburin Aiki | Kwan zuma |
| Ƙarfin Laser | 50W |
| Gudun Yankewa | 0-60 mm/s |
| Gudun zane | 0-400mm/s |
| Ƙaddamarwa | ± 0.05mm/1000DPI |
| Karamin Harafi | Turanci 1 × 1mm (Haruffan Sinanci 2*2mm) |
| Tallafin Fils | BMP, HPGL, PLT, DST da AI |
| Interface | USB2.0 |
| Software | Rdworks |
| Tsarin kwamfuta | Windows XP/win7/win8/win10 |
| Motoci | Motar Stepper |
| Wutar Lantarki | AC 110 ko 220V± 10%,50-60Hz |
| Kebul na wutar lantarki | Nau'in Turai/Nau'in China/Nau'in Amurka/Nau'in Burtaniya |
| Muhallin Aiki | 0-45 ℃ (zazzabi) 5-95% (danshi) |
| Amfanin wutar lantarki | <350W (Jimla) |
| Z-Axis motsi | Na atomatik |
| Tsarin matsayi | Mai nuna haske mai ja |
| Hanya mai sanyaya | Tsarin sanyaya ruwa da tsarin kariya |
| Girman Injin | 115*80*63cm |
| Cikakken nauyi | 85KG |
| Kunshin | Daidaitaccen akwati na plywood don fitarwa |
| Garanti | Duk goyon bayan fasaha na rayuwa, garanti na shekara guda, ban da abubuwan amfani |
| Na'urorin haɗi kyauta | Air Compressor/Pump Water/Air Pipe/Ruwa/Software da Dongle/ Manual Mai Amfani da Turanci/USB Cable/Power Cable |
Siffofin samfur
1, tare da shigo da mikakke jagora da kuma high-gudun mataki mota da kuma drive, sabõda haka, da sabon sakamako na santsi gefuna ba tare da ripples.
2, wani hadedde frame tsarin zane, sabõda haka, da inji gudanar barga da kuma noiseless.
3, bude software dubawa, jituwa tare da Autocad, Coreldraw da sauran vector zane zane software.
4, high-ƙarfi karfe farantin, yadda ya kamata tabbatar da santsi aiki da kuma rayuwa na kayan aiki.
5. na musamman sama da ƙasa hakar hayaki da ƙura kau tsarin, hurawa iska don kare sassaka abu.
Aikace-aikacen samfur
Ya dace da sassaƙa da yankan abubuwa daban-daban waɗanda ba ƙarfe ba.
1. Abubuwan da ake amfani da su: kayan itace, takarda, fata, masana'anta, gilashin kwayoyin halitta, resin epoxy, ulu, filastik, roba, yumbu, crystal, Jade, kayan bamboo, kayan lantarki da sauran kayan da ba na ƙarfe ba.
2. Masana'antu masu dacewa: tufafi, kayan ado, kayan wasan kwaikwayo, kayan ado na gida, jakunkuna da safofin hannu, fata a cikin masana'antar wasan kwaikwayo, yankan fata da zane-zane, zane-zane, samfuri, talla, kayan ado, kayan lantarki, masana'antar filastik, bangarori na acrylic, matsakaici yawa na ado bangarori da sauran wadanda ba karfe faranti na madaidaicin yankan da daidaitattun lantarki masana'antu yankan.Yanke da zanen gilashin halitta, ƙirar gine-gine, faranti na bugu na roba, bamboo da kayan itace.
Misalin nuni
