Fiber laser cutting machine can occupy an important position in the cutting industry, and its high quality cutting effect is directly related. In the actual manufacturing production, the quality of fiber laser cutting machine has a great impact on the cutting effect, although the laser cutting machine performance is very good, but in order to fully and stably play its role efficacy, we need to understand what factors are affecting the cutting quality of fiber laser cutting machine, the following follow Gold Mark to see.

Laser power of the three areas (overburned area, defect-free area, hanging slag area)

1. Overburned area: when the laser power is too large, resulting in excessive heat input, so that the melting range of the workpiece is greater than the range of high-pressure airflow can drive away, the molten metal is not blown away by the airflow and produce overburning.

2. Defect-free zone: that is, the laser power is in the right range, this time the cutting effect is good, called the defect-free zone.

3. Hanging slag area: when the laser power is too small, insufficient heat, the closer the lower edge of the molten product temperature is lower, and the greater the viscosity, and thus failed to be blown away by the high-pressure airflow and stays in the lower edge of the cutting surface to produce hanging slag. In severe cases can not be cut to form a kerf.

 Laser cutting machine cutting quality judging criteria

Cutting thickness of more than 2mm plate laser cutting, the distribution of the roughness of the cutting surface is not uniform, varying widely along the thickness direction, and its changing conditions have two characteristics.

1, the shape of the cutting surface is divided into two very different parts. The upper part of the surface is flat and smooth, the cutting stripe is neat and fine, and the roughness value is small; the lower part of the cutting stripe is disordered, the surface is uneven, and the roughness value is large. The upper part has the characteristics of direct action of laser beam, while the lower part has the characteristics of molten metal scouring.

Whether continuous laser cutting, or pulsed laser cutting, cutting surface shows that there are two parts of the upper and lower, the difference is pulsed laser cutting and the upper part of the cutting stripes and pulse frequency has a corresponding relationship: the higher the frequency, the finer the stripes, the smaller the value of surface roughness.

2, the surface roughness in the upper area of the cutting surface is largely uniform, does not change with height; while the lower area of the surface roughness changes with height, the closer to the lower edge, the greater the value of surface roughness diligence.

Jinan Gold Mark CNC Machinery Co., Ltd. is a high-tech industry enterprise specialized in researching, manufacturing and selling the machines as follows: Laser Engraver, Fiber Laser Marking Machine, CNC Router. The products have been widely used in advertisement board, crafts and molding, architecture, seal, label, woodcutting and engraving, stonework decoration, leather cutting, garment industries, and so on. On the base of absorbing the international advanced technology, we provide the clients the most advanced production and perfect after-sale service. In recently years, our products have been sold not only in China, but also as far as Southeast Asia, Middle east, Europe, South America and other overseas Markets.

Email:   cathy@goldmarklaser.com
WeCha/WhatsApp:   +8615589979166