Lenses as a laser cutting machine accessories, usually may not be very visible, but the lens is an important presence that directly affects the work of laser cutting machine. There are many kinds of lenses assembled on laser cutting machines, such as focusing lenses, protective lenses, etc., but the optical lenses in the laser system are consumable. When using the machine, the lens should be properly cleaned and operated, in order to extend the life of the laser cutting machine as long as possible and reduce the cost of use, be sure to clean the lens in strict accordance with this specification. The following follow GOLD MARK LASER to see how to properly clean the laser cutting machine lens.

  Precautions for proper cleaning of laser cutting machine lens.

1. Be sure to wear finger gloves or rubber gloves to install the lens.

2. Prohibit sharp instruments to avoid scratching the surface of the lens.

3. Take the edge of the lens when taking the lens to avoid contact with the film layer, the environment for testing and cleaning the lens must be dry and clean.

4. The workbench must maintain several layers of clean tissue and several clean lenses.

5.Do not talk over the lens and keep potential contaminants (such as food, drinks, etc.) away from the work environment.

 The correct steps to clean the laser cutting machine lens are as follows.

1. Blow off the floating matter on the surface of the original part by blowing a balloon.

2. Use analytical pure acetone to gently clean the lens. Cleaning should be completed at once to avoid the production of wavy tendons.

3.If acetone can not remove all the dirt, then use acid vinegar to clean.

4. When contaminants and lens damage cannot be removed and removed, the only way to restore good performance is to replace the lens.

During the replacement process, the optics are placed, tested, and installed with care to keep the lens free from damage and contamination. This way its life and performance will undoubtedly be significantly improved, which is one of the ways we can ensure the life and stability of the laser cutting machine, bringing more benefits to manufacturers.

Jinan Gold Mark CNC Machinery Co., Ltd. is a high-tech industry enterprise specialized in researching, manufacturing and selling the machines as follows: Laser Engraver, Fiber Laser Marking Machine, CNC Router. The products have been widely used in advertisement board, crafts and molding, architecture, seal, label, woodcutting and engraving, stonework decoration, leather cutting, garment industries, and so on. On the base of absorbing the international advanced technology, we provide the clients the most advanced production and perfect after-sale service. In recently years, our products have been sold not only in China, but also as far as Southeast Asia, Middle east, Europe, South America and other overseas Markets.

Email:   cathy@goldmarklaser.com
WeCha/WhatsApp:   +8615589979166